Ardex Feather Finish 10 Pound Bag Cement Based Finish Underlayment 300 Square ft

Description

ARDEX FEATHER FINISH®
Self-Drying, Cement-Based Finish Underlayment
ARDEX FEATHER FINISH mixes to a creamy, smooth finish underlayment that eliminates flooring installation problems associated with disbonding, crumbling, mold, mildew and staining. ARDEX FEATHER FINISH may be used as an embossing filler when mixed with ARDEX P 82TM Ultra Prime.
Install over: concrete, masonry, wood, terrazzo, and ceramic and quarry tile - as well as properly prepared residues of cutback and other non-water-soluble adhesives on concrete - all without the need for priming or the use of a latex additive.
Key Features
Blend of hydraulic and other cements
Self-drying matrix
Mixes with water only
Trowelable
Mold and mildew resistant
Interior use
Installation
General priming recommendations:
Porous surfaces: No priming required
Most non-porous surfaces (epoxy coating systems, metal and concrete treated with silicate compounds) must be primed with ARDEX P 82TM Ultra Prime
Gypsum underlayment - Use ARDEX P 51TM Primer
Packaging: 10 lb. (4.5 kg)
Coverage: Up to 300 sq. ft. per bag (27.9 m2)
Thickness:
True featheredge
1/2 in. (13 mm) over large areas
Any depth in small areas
Pot life: 20 minutes (may be retempered)
Install floor coverings: 15 minutes