FLOR-SIL Hardener / Densifier for Concrete & Terrazzo 5-Gallons New Factory Seal

Description

FLOR-SIL
Hardener / Densifier for Concrete & Terrazzo
Description
FLOR-SIL
is a concrete and terrazzo densifier formulated with the latest hybrid lithium chemical technology. Used in the Diamatic Management Services (DMS) ULTRAFLOR
System. FLOR-SIL
penetrates deep into concrete surfaces, providing longer life and higher reflectivity to the polished concrete surface. FLOR-SIL
is an environmentally friendly treatment crucial to the installation of the ULTRAFLOR
System. Together, FLOR-SIL
and ULTRAFLOR
produce a concrete/terrazzo surface with improved abrasion resistance and reduced surface dusting. With proper installation, FLOR-SIL will not leave clouding effects that can be difficult to remove. FLOR-SIL
is an easy to apply product that requires only one treatment with no need for brooming or rinsing—a common procedure in sodium and potassium-based densifier products. FLOR-SIL
will not contribute to alkali-silica reactivity (ASR).  FLOR-SIL
inhibits alkali salts (efflorescence) and sweating in concrete/masonry surfaces.
FLOR-SIL
and the ULTRAFLOR
System extends the life of the concrete far longer than the traditional polishing process while enhancing the appearance of the surface. Ultimately, this results in superior durability, exceptional shine retention, and lower life-cycle costs in comparison to all floor coating/covering systems.
Application
The application temperature range should be between 40-90 degrees F (5-32 C).
1. Grind the concrete to remove all foreign material from the concrete surface and then bring the surface profile to a 100-200 grit finish. This step opens up the surface ensuring better penetration.
2. Mix, shake or stir thoroughly before applying.
3. Depending on size of work area, product can be applied with a pump-up sprayer or a high volume, low-pressure sprayer (HVLP). Apply FLOR-SIL to the surface evenly at the rate of approx. 400-500 sq. ft. per gallon. Follow the application immediately using a micro-fiber mop to remove any excess material. Allow material to remain on the surface 20-30 minutes. DO NOT LET ANY AREA DRY OUT during this time. Add more FLOR-SIL as needed in order to maintain a uniformly wet surface.
4. After material has penetrated and is no longer glistening on the surface, continue grinding and polishing to the intended final surface profile and desired finish. If using wet polishing method, or on integrally colored concrete, we recommend using an auto scrubber and water to remove residual slurry between abrasive disc grits.
Coverage
400 to 500 sq. ft. per gallon (12-15m2 per liter). Note: Coverage or treatment yield will vary with concrete quality, porosity, finish, and the environment.
Equipment
Pump type sprayer, micro-fiber pad with applicator, personal safety equipment. The DIAMATIC Condor applicator may also be used for larger applications.
Advantages &Benefits
Deepens clarity and heightens reflectivity (gloss)
Extends the service life of the floor
Penetrates and seals existing hardened floors
User-friendly, non-whitening
Improves chemical and water resistance
Easy to use and maintain
Increases abrasion resistance
Environmentally friendly — VOC compliant
Reduces alkalinity/efflorescence
Interior / exterior use
Please View My Other Listings for more from this same Family Line as well as Many other Products from Household to Industrial & Automotive to Just Good Ole-Fun Stuff.
Click the links below
See My other items
Visit MEL_Sourcings Store Here on eBay
GREAT Package Price’s!
*Bulk & Pallet shipments available*
Please view My Feedback here on eBay You will see that I am a Fair and Honest Seller and Truly Believe that...
"
THE ONLY GOOD DEAL IS THE DEAL THAT IS GOOD FOR EVERYONE!
"
All Items ship same day payment is made whenever possible.
All items are New in Original Packaging with No issue unless otherwise stated.
Have a Special Request or Need
?
=
Please contact via eBay Message if any questions or if You would like to inquire about Special - Custom & or Quantity Orders.
Ask Me about Quantity, Package & Multi Order Discounts
Shipping to Hawaii, Alaska, Puerto Rico & others outside of the lower 48 US States may have an additional shipping fee = I only charge the actual shipping fee that is charged to MEL_Sourcing. I do not profit from shipping cost.
Domestic & International Returns Please View return policy for each listing
Unless otherwise stated & when excepted Domestic Return Shipping will be paid by MEL_Sourcing / International Return Shipping to be paid by Buyer